[4.6.0.11] App Support, app grid - ING Banking App and others are killed (closed) after entering PIN

[xneo]

Same here… Unfortunately I need this app today
Was a bad idea updating without having a backup (device).
Currently I am playing around trying to find a workaround.

[jcerdan]

Hi,
Yes, Android apps are crashing everytime.

Here’s what I can see in the logs:

may 21 18:39:00 SailfishOS-GNU-Linux lipstick[3531]: [W] unknown:0 - Cannot send touch event, no pointer focus, fix the compositor
may 21 18:39:00 SailfishOS-GNU-Linux lipstick[3531]: [W] unknown:0 - Cannot send touch event, no pointer focus, fix the compositor
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: release 26026:26345 transaction 2141121 in, still active 
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: send failed reply for transaction 2141121 to 27849:27896  
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: undelivered transaction 2141126                                                                                                          
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: unfinished BINDER_WORK_NODE, proc has died                
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: unfinished BINDER_WORK_NODE, proc has died 
... <repeated-many-times>
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: unfinished BINDER_WORK_NODE, proc has died                                                                                               
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: unfinished BINDER_WORK_NODE, proc has died                                   
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: unfinished BINDER_WORK_NODE, proc has died                                   
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: release 26026:26120 transaction 2083778 out, still active
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 25942:25942 BC_DEAD_BINDER_DONE 0000000000000002 not found
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 25942:25942 BC_DEAD_BINDER_DONE 0000000000000003 not found                                                                               
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 25942:25942 BC_DEAD_BINDER_DONE 0000000000000004 not found
may 21 18:39:00 SailfishOS-GNU-Linux [25942]: [W] unknown:0 - "GNSS Remote died, cleaning up!"                                                                                                
may 21 18:39:00 SailfishOS-GNU-Linux lipstick[3531]: [W] unknown:1036 - file:///usr/share/lipstick-jolla-home-qt5/compositor.qml:1036: TypeError: Cannot read property 'closeHinted' of null
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 23657:23657 BC_DEAD_BINDER_DONE 0000000000000003 not found
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 25942:25942 BC_DEAD_BINDER_DONE 0000000000000002 not found
may 21 18:39:00 SailfishOS-GNU-Linux [23657]: [W] unknown:0 - alien died! Trying to reconnect.                                                                                                
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 23657:23657 BC_DEAD_BINDER_DONE 0000000000000002 not found
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 23657:23657 BC_DEAD_BINDER_DONE 0000000000000005 not found
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 25942:25942 BC_DEAD_BINDER_DONE 0000000000000003 not found
may 21 18:39:00 SailfishOS-GNU-Linux kernel: binder: 23657:23657 BC_DEAD_BINDER_DONE 0000000000000004 not found
may 21 18:39:00 SailfishOS-GNU-Linux [25942]: [W] unknown:0 - alien.media.file_observer died! Trying to reconnect.
may 21 18:39:00 SailfishOS-GNU-Linux [23657]: [W] unknown:0 - alien.contacts died! Trying to reconnect.
may 21 18:39:00 SailfishOS-GNU-Linux [23657]: [W] unknown:0 - appsupport.inputattachservice died! Trying to reconnect.
may 21 18:39:00 SailfishOS-GNU-Linux [25942]: [W] unknown:0 - alien.connectivity died! Trying to reconnect.
may 21 18:39:00 SailfishOS-GNU-Linux [23657]: [W] unknown:0 - alien.intent.resolver died! Trying to reconnect.

I’m not sure if there’s can be a workaround for that.

[JoOppen]

I tried a couple of apps like LinkedIn, Deepl, some Public transportation Apps (my tickets!) or Fennec that do not crash. So, for me it is so far only the ING Banking App that crashes (mostly)

[xneo]

I managed to start the App at least once and then install the app on another device.

1. Rebooted the device
2. Put device on flight mode
3. activated WIFI
4. Started ING app (that crashed)
5. switched off flight mode
6. The app opened by itself again and was working.

So seems similar to OOM issue…

[amaretzek]

Since you mention WiFi, what about this:

Roborock app doesn't work

I just got this working! Noticed that it was hanging on the splash while trying to set up some sort of wifi networks, which android isn’t allowed to do. So I tried denying the permission for that, and now it starts. Open the Android settings app by tapping ‘Android version’ on the AppSupport settings page. Then go to ‘Apps and Notifications’ > Advanced > Special App Access > Wifi Control and set Roborock to not allowed. I don’t think you’ll be able to set up a new vacuum on Sailfish as I think …

[tom.i]

I have same problem with HomeCreditCZ app. If I turned off network, app is alive, but without connection it’s useless of course. Then I try hack from @amaretzek but I can’t see HomeCredit app in the list of apps for ‘Wifi control’ as he mentioned.

[martinh]

Strange side note: When I run the app from ssh with apkd-launcher de.ingdiba.bankingapp.apk de.ingdiba.bankingapp/com.ing.mobile.diba.startup.SplashActivity, it works. Maybe that helps debugging.

[adekker]

This bug report is likely the same issue/duplicate Rowenta Robots (android app) stop working on 4.6.0.11

[JoOppen]

I can confirm that starting the ING Banking App from e.g. Aurora store is fine without problems. Same goes for starting the ING Banking App from the terminal with apkd-launcher de.ingdiba.bankingapp.apk de.ingdiba.bankingapp/com.ing.mobile.diba.startup.SplashActivity.

Apparently, the problem is related to starting the App from the app grid only. Hopefuilly this can be fixed by Jolla before making 4.6 available to everyone (I suppose that is the raison d’etre for the Early access)

[JoOppen]

Not yet solved with 4.6.0.12

But it is still EA and the workarounds are easy. So I stay optimistic wrt the release to all

[Vieno]

Had the same problem with the ING DiBa Banking App (with 4.6.0.12). Starting through terminal helped. But I tried to clear app cache and data first, so I have to setup my bank account again. I had to apply for an OTP from ING, which they are sending via postal service in about 2-3 days.

Should have looked in the forum first.

[JoOppen]

Hi @Vieno , you are not alone, bro (took 3 days for me until i got the letter)

[jefrel]

Hi, Same here on XA2 with 4.6.0.13 and BNP banking app.
Workaround works just fine.

[meegouser]

After the upgrade to 4.6.0.13 (XA2 coming from 4.5.0.25), I also am affected by the same issue. At least it still works with aforementioned workarounds, but it nevertheless is a very annoying regression.

[JoOppen]

Since several Android Apps are affected (ING, Teams …) but not all of them (Citrix) but all Android apps can (almost) easily be launched from the terminal, I wonder why this problem is not solved.

For lauching an Android app from the terminal, one needs to enter
apkd-laucher, followed by what is found in /defaultuser/.local/share/applications/apkd_handler_com_TheSpecificAndroidApp

Since this workaaound may not be for everyone, it would be great if Jolla could solve the app-launching bug in order to offer the full potential of AppSupport. All Android apps should stay open when lauched from the app grid. I wonder why some apps are closing after launch when launched from the app grids but stay open when launched from the terminal. My wild guess is that this somehow is related to memory management because it “feels” like an OOM situation

[meegouser]

WPS Office app no longer starting after update to SFOS 4.6.0.13

After upgrading to SFOS 4.6.0.13 android app WPS Office (cn.wps.moffice) no longer starts. With “appsupport-attach logcat” I find this message: 06-21 12:16:09.601 259 298 I ActivityManager: Force stopping cn.wps.moffice_eng appid=10113 user=-1: sfos_background_denied Starting the app from within an app store, e.g. Aurora or Aptoide, works. Any idea what exactly the problem is?

I’m not familiar with Sailfish’s internal error message outputs, but could maybe “sfos_background_denied” be a hint why this problem exists?

[rbrodbeck]

@JoOppen

For lauching an Android app from the terminal, one needs to enter
apkd-laucher , followed by what is found in /defaultuser/.local/share/applications/apkd_handler_com_TheSpecificAndroidApp

Based on this I found a comfortable solution:

1. Install qCommand from OpenRepos: https://openrepos.net/content/coanteen/qcommand

2. In qCommand create a new command: For command and name enter the values you find in your apkd_launcher file.

3. In qCommand, long tap on the new created command, then select “Create launcher icon”. This creates a new file qCommand.autogen-*.desktop in ~/.local/share/application, with the asterisk for a one or two digit number.

4. Edit that file and replace value of Icon with the one you find in your original apkd_launcher file

Now you have a new launcher icon, that looks like the original one, and it’s working. Maybe, for the new icon tp display the correct image, you have to restart the start screen

[mips_tux]

Exactly the same bug on Mes Comptes (BNP) app.

[mkiol]

The same problem occurs with the IKO app (PKOBP Bank in Poland). A workaround using apkd-launcher from the terminal works well.

[jovirkku]

It is fixed in 4.6.0.15. The ING bank app can be opened and used normally.