[release notes] Koli 4.0.1

Terminal does not seem to remember previous commands anymore.

4 Likes

Had the same. Since then I see only “waiting for connection”, wenn triggering the update. I guess this error you show is maybe due to an incomplete download.

gPodder has some UI bugs, hope to get to them soon.

Incidentally, this title is a little misleading. When I first read it, I thought “uh? Koli? Never heard of this app; what does it do?”.

1 Like

Hmm, that text has been inherited from the times of Jolla Phone where there was often a lack of storage space. Downloading and processing an OS update of hundreds of megabytes requires some free space. “Internal storage” referred to the storage inside the device, in contrast to external storage in a memory card. It is the time to reconsider that text.

3 Likes

Update went on my case fine yesterday on XA2 Dual-Sim. The phone was a bit sluggish first but it has settled down. Unfortunately Situations app doesn’t recognize the phone screen state (on/off) correctly anymore :frowning:

Great job though!

Update worked fine yet Android apps do not have internet connectivity with cellular network (3g/4g does not make any difference). When wlan is on Android apps work fine. Sony XA2 dual sim. I tried flight mode - does not help and reverting back to Android and then installing Sailfish seems a bit burdensome (and I’d need to find a Windows computer first :slight_smile: ) Solved: activated empty sim slot, deactivated the actual sim. Repeat the other way around and reboot = = > Android apps have connectivity in cellular network.

2 Likes

@oroesler thanks for the hint. That sounds very promising, however I didn’t find any further info on that here in this forum nor on https://together.jolla.com. system_a is not a useful search term.
Do you have any link available? Could you expand on that?

Anyone else have issues with the browser since the update? I have installed a pretty hefty /etc/hosts on my phone to block unwanted cruft when browsing, since I cannot manage to install Privacy Badger, and since the update the browser is ignoring these entries.

This seems to be related to the new firejail setup (which is a really great idea, btw!). I’ve looked into it a bit and it looks like it should work. Browser process runs like this (according to ps)

/usr/bin/firejail --quiet --profile=/etc/sailjail/permissions/Base.permission --profile=/etc/sailjail/permissions/Mozilla.permission --profile=/etc/sailjail/permissions/Audio.permission --profile=/etc/sailjail/permissions/Location.permission --profile=/etc/sailjail/permissions/Internet.permission --profile=/etc/sailjail/permissions/Downloads.permission --profile=/etc/sailjail/permissions/Documents.permission --profile=/etc/sailjail/permissions/Pictures.permission --profile=/etc/sailjail/permissions/Videos.permission --profile=/etc/sailjail/permissions/Music.permission --profile=/etc/sailjail/permissions/Sharing.permission --profile=/etc/sailjail/permissions/sailfish-browser.profile --whitelist=/usr/share/sailfish-browser --whitelist=/usr/share/applications/sailfish-browser.desktop --whitelist=/home/nemo/.local/share/sailfish-browser --mkdir=${HOME}/.cache/org.sailfishos/browser --whitelist=${HOME}/.cache/org.sailfishos/browser --mkdir=${HOME}/.local/share/org.sailfishos/browser --whitelist=${HOME}/.local/share/org.sailfishos/browser --mkdir=${HOME}/.config/org.sailfishos/browser --whitelist=${HOME}/.config/org.sailfishos/browser --dbus-user=filter --dbus-user.own=org.sailfishos.browser --private-bin=sailfish-browser -- /usr/bin/sailfish-browser

The Internet.permission profile contains this entry:

private-etc ssl,hosts,pki,crypto-policies

Which, AFAICT, should copy the hosts file into the private jail. However, all the blocked entries (that are hardcoded to go to 0.0.0.0 in /etc/hosts) will now open in the browser. If I open the browser from the terminal without jailing it, this doesn’t happen.

3 Likes

Update went smoothly on my XA2 plus Dual Sim.
I don’t like at all the new notification UX: either on main screen and in the event view. I found managing notifications in event views more friendly before. Besides icons are ugly and again a step toward android.

1 Like

Thank you for this update. It works well so far. I only had one problem: the update failed the first time I attempted to perform it, but worked flawlessly the second time. I particularly enjoy the firejail sandboxing integration. Notification actions are a very useful feature as well.

Xperia 10 updated and everything went smoothly. But Android support does not work anymore. If I open Settings => Android -Support => cannot Start/stop press buttons because they are disable. (phone is rebooted couple of times)

When trying to start Android app it will try to load it for a while and then it fails.
When I look journalctl it shows following entries:
helmi 05 11:49:27 Sailfish kernel: binder: 4617:4617 transaction failed 29189/-22, size 0-0 line 3024
helmi 05 11:49:28 Sailfish kernel: binder: 4617:4617 transaction failed 29189/-22, size 0-0 line 3024

Tried to uninstall/reinstall Android support but id did not change anything.

Edit: journalctl -xe output:

  • Unit aliendalvik.service has failed.
    –
    – The result is RESULT.
    helmi 05 11:56:12 Sailfish systemd[1]: selinux: Unknown class service
    helmi 05 11:56:13 Sailfish apkd[4617]: Alien Dalvik is activating (auto-restart)
    helmi 05 11:56:13 Sailfish kernel: binder: release 19897:20006 transaction 284151 in, still active
    helmi 05 11:56:13 Sailfish droid-hal-init: Received control message ‘interface_start’ for ‘android.hardware.radio.config@1.0::IRadioConfig/default_alien’ from pid: 2889 (/sy
    stem/bin/hwservicemanager)
    helmi 05 11:56:13 Sailfish droid-hal-init: Could not find service hosting interface android.hardware.radio.config@1.0::IRadioConfig/default_alien
    helmi 05 11:56:13 Sailfish kernel: binder: send failed reply for transaction 284151 to 20026:20110
    helmi 05 11:56:13 Sailfish logd: logdr: UID=1000 GID=1000 PID=935 n tail=127 logMask=19 pid=0 start=0ns timeout=0ns
    helmi 05 11:56:13 Sailfish kernel: ptrace attach of “system_server”[21196] was attempted by “crash_dump32 155 981 1”[21177]
    helmi 05 11:56:14 Sailfish init: Untracked pid 986 exited with status 0
    helmi 05 11:56:14 Sailfish init: Untracked pid 1005 exited with status 0

after that a lot of these:
helmi 05 11:56:15 Sailfish libprocessgroup: Error encountered killing process cgroup uid 1000 pid 41: No such file or directory
helmi 05 11:56:15 Sailfish init: Sending signal 9 to service ‘ril-daemon’ (pid 40) process group…
helmi 05 11:56:15 Sailfish libprocessgroup: Failed to open process cgroup uid 1001 pid 40: No such file or directory
helmi 05 11:56:15 Sailfish libprocessgroup: Error encountered killing process cgroup uid 1001 pid 40: No such file or directory

finally:
helmi 05 11:56:16 Sailfish systemd[1]: aliendalvik.service: Service hold-off time over, scheduling restart.
helmi 05 11:56:16 Sailfish systemd[1]: aliendalvik.service: Start request repeated too quickly.
helmi 05 11:56:16 Sailfish systemd[1]: aliendalvik.service: Failed with result ‘exit-code’.
helmi 05 11:56:16 Sailfish apkd[4617]: Alien Dalvik is failed (failed)

1 Like

Is that fix available as patch for users to try?

It’s only just been merged in, but if it all goes through the checks okay I’ll see what I can do (I’ll post any further info here).

updated smoothly on x II. uninstalled flatpak support before.
okboard has an issue again, like in previous version.

android works for me, deezer starts

nice update !!
like it. browser is really smooth and quick. very happy so far
the remorse time was rewoked ! thanks !

Update went fine here on an XA2. Finally we got a working multiple address books support, that’s really great \o/.

Had to uninstall sailfish connect before the update, as requested. Does anyone know why or what is blocking sailfish connect from working with SF4 ?

Did you try to install it back afterwards? I mean you could get information on what features are not working or is the app working at all. I had the same case with ChargeMonitor app which I tried to install back and noticed it didn’t show any battery related values anymore, basically just a blank UI. Maybe it could be related to Sailfish Connect too?

there’s a missing dependency when you try to install it after so I guess that must be the reason - libcontextkit-statefs-qt5.so

I succesfully updated my XA2 Ultra just now, but WhatsApp doesn’t start, not even after removing and reinstalling. AlienDalvik is up to date, reboot doesn’t help either. Anyone else with this quirk?

Edit: I started a separate thread for this issue: [4.0.1.45] WhatsApp doesn’t start since it doesn’t seem to be a common issue at all.

1 Like

The whole android support does not start. reinstall from jolla store did not help. Settings -> android support shows the start button active and stop as disabled. Pressing start does nothing. WA tries to start but closes soon after.
This is on xperia X