The Volla 22 (Gigaset GS5) Thread

Dear Mr Piggz, thanks again and by the way me and a friend own a Rephone (6 GB RAM - nice). Both work as a daily and almost perfect with. …0.18.

1 Like

Sounds good to me. Thanks.

I have problems to run waydroid:

Got my Volla 22 two days ago. Running 4.5.0.19 via sfos-upgrade on a sd card. Works so far nicely. Will test it further. But right now with no waydroid …

edit the file /etc/gbinder.d and change aidl2 to aidl3

I already changed it, for all entries:

[root@Phone22 defaultuser]# cat /etc/gbinder.d/anbox-hybris.conf
[Protocol]
/dev/puddlejumper = aidl3
/dev/vndpuddlejumper = aidl3
/dev/hwpuddlejumper = hidl

[ServiceManager]
/dev/puddlejumper = aidl3
/dev/vndpuddlejumper = aidl3
/dev/hwpuddlejumper = hidl

Or do I have to use the other gbinder-package? Not the hybris one?

1 Like

Kuvakaappaus - 2023-04-15 18-19-21

4 Likes

Ahh, thanks. Ok, now lineageos starts. Great.

I haven’t found it before, that apart form aidl3 something else has to be changed.

1 Like

@piggz just to note that the sim card foo and the constant jumping cpu usage issues are no longer the case. Reboot leads to normal SIM PIN prompt and the cpu usage looks about as normal as it gets.

1 Like

Sorry, but doesn’t work for me. Tried to install waydroid with no success. And now sim card doesn’t get recognized after several reboots. Before it was a good daily. How do I completely remove waydroid? I didn’t need it in past and I guess I’ll not need it in future. Please help me to get rid off it.Thanks.

boot to recovery …factory reset (format data)…and flash sailfish again…

Please, no way. I’ll not reconfigure everything I need.
Until I find a solution I do have to use my Xperia 10 plus again. Let’s see. No hurry. Sadly, because I enjoyed the Rephone a lot.

du mich auch… auf dem rephone funktioniert kein sailfish!

Finaly I realy had to reflash, and now everything works like charme again. I must have done a mistake somewhere in between. Right now it is my daily again, without waydroid. Thanks Mr. Piggz, for your good work.

Does sending images via Fernschreiber work for anyone? It seems that there are some troubles with it, at least for me.

I am further testing, pictures and gps are way better than with the xperia xa2 plus.

Sending images via Fernschreiber doesn’t work for me, too (Sailfish versions 4.5.0.18 and 4.5.0.19)

Don’t know if it’s device specific or a general issue.

Sending the images via fernschreiber as file works though.

Edit: Seems to be device specific. Sending images from my XPeria 10Plus via Fernschreiber works on 4.5.0.19.

Fernschreiber pics works for me (Volla22 and GS290).

Which version do you use (SFOS, Fernschreiber and TDLIB)?
What was your installation source (openrepos or Jolla store)?

Ah, the volla22 with 4.5.0.19 I also have an issue. Works with 4.4.0.72.

I’m a bit messy. The one on the GS290 is from the Store. The Volla22 with 4.5.0.19 is from openrepos-WerkWolf. The older, a GS5, is built from source and that’s an older 4.4. Hmmm.

I just tested the 4.5 version again and with an image attachment I get a double post.

Ok, the 4.5.0.19 version works when launched from the terminal. I believe it’s a sailjail thing.