Jolla Phone update - Deliveries started and other next steps

[jollus]

@Jespsounds

This link shows how to open it…

Jolla phone I3C subboard

According to frengel’s instructions on iFixIt, replacing the sub-board shouldn’t be too difficult. (EDIT: it is a screw-and-plug job. Steps 9, 10 and 11 may not be needed when only replacing the I2C/I3C sub-board; i.e. you have to remove the battery (steps 1 to 5; unscrew and unplug) remove the mid-frame (steps 6 to 8; unscrew und removal of one sticker; pay attention to camera(s); they may stick to the mid-frame) replace I3C board (step 12; unscrew, unplug and replace) reassemble) Therefore,…

here is a pic of the difference between the I2C & I3C..