Look the first post. Even if not blogged I guess that it’s official. Or something 
.
1 Like
Midsummer? Everyone busy with 
?
1 Like
See this Thread above …
1 Like
Sony Xperia 10 III (public release) here… I tried the update, ignored the warnings (did this for many updates already… now it was a very bad idea as it seems) and now the smartphone is in a boot loop with a white screen saying “no apps started”.
So I tried to go to the recovery mode using this article (Recovery Mode | Sailfish OS Documentation) but the problem is: I can flash the recovery image file to both boot_a and boot_b (and even back to hybris-boot.img) but when I try to start it it just says " Your device is corrupt. It can’t be trusted and won’t boot.” and it does not go into the recovery mode no matter what.
Like that, telnet isn’t possible (yes my computer is able to do it, but SFOS is not in the right mode).
I do not (constantly) see the device “RNDIS” in the device manager of my windows machine.
When I start the smartphone, a very short time it is recognized (with drivers installed as it seems) when the SFOS logo is on the screen but 1 or 2 seconds later it disapears again.
The only recovery mode I can (sometimes with the right timing) access seems to be the one of the phone itself called “Android Recovery” where i do see a couple of options but nothing about the shell.
Looks like this (colored in yellow and blue font):
Android Recovery
Sony/pdx213/pdx213
11/RKQ1.210107.001/1
usre/dev-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Enter fastboot
Apply update from ADB
Apply update from SD card
Wipe data/factory reset
Mount /system
View recovery logs
Run graphics test
Run local test
Power off
Any idea what I am doing wrong?
I can reflash with “fastboot flash boot_a hybris-boot.img” and “fastboot flash boot_b hybris-boot.img” without a problem and am in the same state again (flashing white screen no apps installed).
Yes my phone’s bootloader is unlocked. (there is a big notice when I start the phone even now). I can not use “fastboot oem device-info” to see it (“unknown command”) but I can see it if I do “fastboot getvar all” too.
I would like to get into telnet somehow to restore some data. Any help would be highly appreciated.
Best regards and thanks for any answers
Fuchur
install on a 10iii has gone very nicely.
even have android service starting automically!
Searching key words “Your device is corrupt” (with the quotation mark), I found this topic: "Your device is corrupt. It can't be trusted and won't boot." after reflashing - #8 by robthebold
This may be a lead to fix your problem.
Thank you very much, but they are only talking about reflashing the phone, which might be the only “end” solution I can find, but before that, I would like to get some data from my phone which I can not since I cant go to Recovery mode (the one from Sailfish instead of Android). In recovery mode I should be able to go to the shell and transfer data to an microsd card.
It might even be possible to get the phone to a running state with telnet as far as I understand (for instance by removing OSM scout server and something else I do not remember at the moment) but before that I need to go to the recovery mode to get telnet access.
Best regards
Fuchur
What I assume is, that my phone never did the update to 4.6 but is still on 4.5.0.25(?) and the flash “hybris-recovery.img” which I have is for 4.6.0.13. (why ever Jolla is not providing at least the last one before that too in case you need to recover after a faulty update is beyond me…)
I second that. Best feature for my use case.
A non crashing, up to date browser would be ace also.
2 Likes
I had this. Never used DND but “flashlight” was inserted first in the list
My actions were messed up too. A custom Bluetooth action (to open the Settings submenu) was replaced with Edge Swipe (a Nephros patch)!
I have another issue. Something about Android keyboards was changed. There’s a mechanism to move the location of the text entry box in both Android and SFOS. This no longer works on m.facebook.com on Opera (the latter site is incredibly slow on native browser). Works in www.facebook.com.
If there’s one reason for Android Support it is Fennec with uBlock Origin and Privacy Badger.
I never used the SF Browser and probably never will.
4 Likes
Here is the same behaviour I am experiencing with my Xperia 10 III when I try to access the recovery mode:
Does anybody have a 4.5.0.X public release channel hybris-recovery.img for me?
(please not as a torrent download link… I cannot download that… most windows clients are instantly recognized as malware by the virus scanners, the installers are often adware infected anyway and if you find one it is close to unlikely to download anything matter what anyway since close to nobody is offering the file anyway. A ZIP file would be nice… even if you transfer it with wetransfer or something i dont mind…)
Why does jolla not offer at least one or two versions back in the jolla store but only the most recent (in this case defective) version?)
Here is something where they offer older installers as it seems, but all as torrent files which I can not download from:
Ok, I found after a lot of searching I found a download for a full version 4.4 in which i found a working hybris-recovery.img which brought me to the recovery mode and i could successfully connect by telnet, mount my sd and I am copying my files at the moment.
If I copy everything from /home/defaultuser/* it should copy all the “custom” files, right?
Or should I copy more to recreate my phone if necessary?
Since I flashed Sauna on my XA2 Ultra (after some problems with the update) I cannot send or receive SMS (to me more precise: I can send them and can receive them, but they are not shown in the messages app, only at the receivers phone, and in the notification view, respectively). In the same fashion I can’ create new calendar entries. There is no error shown, but they are not displayed afterwards. Does anybody know what could be the culprit here? Thank you everybody for assistence.
I resolved the problem with the calender by selecting the correct calendar to save to. Sorry for the fuss…
I noticed this after the upgrade too. Sometimes you get only IPv6 connectivity and need to turn off/on mobile data to get IPv4+IPv6 working. Also using Elisa and Xperia10III here.
It’s not a big issue really, push notifications for most messaging apps all work on IPv6 only, and it’s easy to toggle the mobile data when you notice some IPv4 only website not loading.
I also went to purchase a prepaid DNA sim to test out the 5G experience. Download speeds approx 300Mbps on 4G and 150Mbps 400 Mbps on 5G. So some room for improvement on the 5G speeds 
EDIT: Went to a different location to test 5G speeds, and got 400Mbps down instead of 150!
Is there more information about this somewhere? Can I change the logo during the Flash process? Or did it just mean that it is supported but there is currently no UI for it?
1 Like
Fennec is my go to browser when the native one fails.
Anybody knows what I have to do to get the OS running again with that error? Or is it better to just wipe it and start from the start?
you will likely save a lot of time if you do a full backup at least of /home and then reflash. since you had trouble flashing 4.6, i would suggest using a desktop computer (as opposed to a laptop) and a usb2 port or usb2 hub to do the actual flashing, if you didnt before.
also, your thing about not downloading torrent files because the clients are spamware is bizarre. try transmission, deluge, or qBittorrent. all are cross-platform, open source under the GPLv3, trusted clients, and are not viruses and do not contain ads or spam. you can compile them yourself without any particular trouble if youre feeling paranoid about it.
however, like you say, i dunno how well-seeded those images are, but i imagine someone out there is seeding them at least occasionally.
I think the thing is not that he doesn’t want to use torrent but that he tried and it didn’t work because of windows security