Problem at recovery procedure

My phone went locked state in my pocket. I tried to unlock it. The problem is :


 Jolla Recovery v2.0

Welcome to the recovery tool!
The available options are:

  1. Reset device to factory state
  2. Reboot device
  3. Shell
  4. Perform file system check
  5. Run sshd
  6. Exit
    Type the number of the desired action and press [Enter]:
    3

If you continue, this may void your warranty. Are you really SURE? [y/N] [y/N] Y
/dev/mmcblk0rpmb: read failed after 0 of 4096 at 0: Input/output error
/dev/mmcblk0rpmb: read failed after 0 of 4096 at 4128768: Input/output error
/dev/mmcblk0rpmb: read failed after 0 of 4096 at 4186112: Input/output error
/dev/mmcblk0rpmb: read failed after 0 of 4096 at 4096: Input/output error
2 logical volume(s) in volume group “sailfish” now active
Fri Oct 9 14:01:46 UTC 2020
WARNING: Locking directory /run/cryptsetup is missing!

Type your devicelock code and press [ENTER] key:
(please note that the typed numbers won’t be shown for security reasons)
[WARNING] Wrong code, try again (4 left)

I can not to give the command :
chroot /rootfs
/usr/lib/qt5/plugins/devicelock/encsfa-fpd --check-code xxxxx

I pulled out the USB datacable, and few seconds later connected again.

root@debian8kde:/home/vlad/Xperia/Sailfish_OS-Jolla-3.3.0.16-f5121-0.2.1.25# telnet 10.42.66.66
Trying 10.42.66.66…
Connected to 10.42.66.66.
Escape character is ‘^]’.

Sorry too many failed lockcode attempts.
And it has not been 24 hours since last attempt.
Connection closed by foreign host.

I know my lockcode…

And now, I have only one chance to do something (get the correct lockcode).
The question is : simply copy/paste these commands above?
Another question is :
The phone now show me “RECOVERY: connect USB cable …”
Is possible to switch off the phone or need to wait 24 hours?

Best regards : -=L=-

Is there anybody out there? (Pink Floyd The Wall 1979)

PLS HELP!

I followed those instructions : https://jolla.zendesk.com/hc/en-us/articles/360002996893

Jolla say :
" If at any point you are uncertain about using Recovery Mode, please contact us ".
I’m here with the problem…

No one knows what kind of code I’m supposed to enter?

Regards : -=L=-

Same boat here mate, did you manage to fix?

https://together.jolla.com/question/202775/using-recovery-to-access-the-root-and-home-file-system/

does this help somehow