Same happened to me - no audio in either direction, regardless if I call somebody or receive the call. Now this is annoying. Restarting didn’t fix it. After another restart just now it works again. Any ideas what causes this, and how to get rid of this behaviour??
I had the same problem today with my XA2. Luckily first restart helped. Same symptoms as in my previous post: https://together.jolla.com/question/225923/xa2-no-voice-and-microphone-doesnt-work-in-phone-calls-after-updating-to-33016/
I am using 10 plus i4293, this is a long time issue for me too, it happen randomly, and also not just no audio from call, also the sound of whole sailfish system is broken. Example: When play video , you can feel its lagging and no sound. There is some journal log when it happened, any guy know what it means? look like this is a kernel issue?
This happened to me again today. Reboot cleared the issue.
We really need some input from Jolla on this:
- It was meant to have been fixed in 3.3 but wasn’t (ref: https://together.jolla.com/question/209442/bug310-330xa2-no-audio-in-voice-calls/) was this looked at in the 3.4 release, is it being tracked? This is severe it’s going to drive away many paid up sailors that have been loving this OS for many years.
- What do you need from us? Please share what diagnostics you want us to run when it occurs.
Maybe @jovirkku can chime in here (just flagging as seen you active on the other threads).
Thanks,
Matt
Is there any data about how common this is? I’ve been reading about it long time. Gathering bits over forum seem bit tedious and unspecific for that.
I’m procrastinating between staying with J1 and changing to XA2 because of different things almost year now. Currently overall other things look good but this worries me guite a lot.
Would it be ok to do poll with XA2 variant, operator, possibly Sailfish version and if problem is occuring to get rough estimate?
1 Like
Same issue here -for over a year!- with my XA2 single sim, KPN.
Already since Sailfish OS Seitseminen 3.1.0.11 when i wasn’t really aware so reboots might have solved it at that time.
Since than i went through every available update, right now i’m still @ 3.3.0.16 awaiting the fixed 3.4.0.22 but the “no audio in either direction issue” is always there !
Rebooting -even several times- doesn’t make any difference …
The only inconvenient way to make a phonecall is by use of the build in handsfree loudspeaker so everybody in my vicinity could join my conversation …
Pretty useless for a phone right ?!
Will this EVER get fixed ?!?
@Franksz:
Please, try the following if you are confident in using the command line and a simple text editor. If you have never used the developer mode before then do not try.
Find a short how-to in https://jolla.zendesk.com/hc/en-us/articles/202011863 and in https://jolla.zendesk.com/hc/en-us/articles/360010391013
devel-su
cp /usr/lib/systemd/system/pulseaudio.service /usr/lib/systemd/system/pulseaudio.service.original ## save the original - just in case
cat /usr/lib/systemd/system/pulseaudio.service ## glance thru the file if you want
vi /usr/lib/systemd/system/pulseaudio.service ## edit the file
Look for the following 3 lines in the editor (they should be from line #18 onwards):
Restart=always
RestartSec=1
Type=notify
Add the following command immediately after those three:
TimeoutStartSec=120
Save the change and exit the editor. Check the file content to be sure the editing session worked:
cat /usr/lib/systemd/system/pulseaudio.service
Restart the phone.
Should there be a need to return to the original you should give the following commands:
devel-su
cp /usr/lib/systemd/system/pulseaudio.service.original /usr/lib/systemd/system/pulseaudio.service ## get the original back (let it overwrite)
reboot
9 Likes
@jovirkku :
Thanks for yor detailed reply i sadly haven’t used developer mode before.
I know where to enable it , i’m not a digital moron but for now this might be a step too far.
I might need a little how to for this or will this become clear once i’ve enabled Developer mode ?
[root@XperiaXA2 nemo]# cat /usr/lib/systemd/pulseaudio.service
cat: can't open '/usr/lib/systemd/pulseaudio.service': No such file or directory
This is on a freshly flashed XA2 running 3.4.
These are the installed pulseaudio services, which one should I edit as per your suggestion?
[root@XperiaXA2 nemo]# find /usr/lib/systemd/ | grep pulseaudio
/usr/lib/systemd/user/pulseaudio.service
/usr/lib/systemd/user/pulseaudio.socket
/usr/lib/systemd/user/user-session.target.wants/pulseaudio.service
/usr/lib/systemd/system/pulseaudio.service
/usr/lib/systemd/system/emergency-call.target.wants/pulseaudio.service
Edit: looks like your intent is the systemd/system service (just missed it in your first step). I have tried this edit and will report back. It will also be good to know what the systemd/user service gets used for, if anything.
1 Like
Yes, indeed. Thanks for pointing it out. How embarrassing to have a clear mistake in one’s instructions… Arghh.
I have fixed the 1st command of my post now.
3 Likes
Yeah, it seems to be common enough. I have this issue I’d say on about 25% of my calls. I don’t make or receive that many calls so it’s difficult to say, but it has caused me significant issues by missing important calls that have taken some time to arrange, and that can’t simply be remade after rebooting.
It’s been happening for me on my XA2 for at least the past two major updates. When it happens, the problem is consistent, seems isolated to just calls (WhatsApp, media etc. still work fine), and doesn’t go away until I reboot the phone. I’m still on 3.3, and was hoping that this would be fixed in 3.4 but that doesn’t seem to be the case. I know voice calls aren’t what they used to be, but it’s still a pretty fundamental bug, that a phone can’t be relied upon for, you know, phone calls.
2 Likes
Thank you for your reply. So it seems quite common if it is happening with device. I hoped it could be something which I can work around with Audio Output Chooser like head phone problem earlier, but it seems not.
I’m wondereing if it could be depending on operator.
With my J1 I’m experiencing mobile data problems after changing operator. Even when mobile data is connected nothing gets transfered. After swithing mobile data off and on I get “Limited connection” status. After this I have to turn it off, enable and disable flight mode and then enable mobile data again.
This seems to happen in morning and possibly because Situations turns mobile data off and network mode to 2G over night. This is of course just a thought.
When I reach the required forum trust level (3 days now…) I am going to add a poll to the initial post here to see if we can see what % of XA2 users and what variants are affected by this issue. It was a great idea to start looking in to that. Figuring out operators will probably be a bit much to poll via the forum but we can start talking about that as this thread gets more traction 
1 Like
Thank you for that. I really apreciate it. My original idea was to make poll as my reply and I was making sure it’s ok to you since this is your topic, but adding it to topic is much better. 
Taking closer look of polls, I’m not sure how they should be build. Looks like they need to be separate polls. So I’m made proof-of-concept polls below to see how it works. I made them with Show who voted option. Hopefully that way it’s possible to keep answers together.
Edit: I closed polls as it looks like they work as intended.
Sailfish version
- 3.0.3
- 3.1
- 3.2
- 3.3
- 3.4
0 voters
XA2 variant
- Normal
- Plus
- Ultra
0 voters
Having call audio issue?
- Yes
- No
0 voters
Hi @jovirkku,
I am also having the “no sound” issue on X10 dual sim 3.3.0.16 (Rokua).
I just added the lines to the pulseaudio - but a “no sound” situation just occurred again, I did not even try to make a call.
When i press start in csd-tool loudspeaker test: i get the following in journalclt -af
Oct 11 18:18:38 Xperia10-DualSIM kernel: glink_tx_common: 110 callbacks suppressed
Oct 11 18:18:38 Xperia10-DualSIM kernel: apr_audio_svc_lpass_smem: glink_tx_common: R[0]:68 Intent not present
Oct 11 18:18:38 Xperia10-DualSIM kernel: __apr_tal_write: glink_tx failed, rc[-11]
Oct 11 18:18:38 Xperia10-DualSIM kernel: apr_audio_svc_lpass_smem: glink_tx_common: R[0]:68 Intent not present
Oct 11 18:18:38 Xperia10-DualSIM kernel: __apr_tal_write: glink_tx failed, rc[-11]
Oct 11 18:18:38 Xperia10-DualSIM kernel: apr_audio_svc_lpass_smem: glink_tx_common: R[0]:68 Intent not present
Oct 11 18:18:38 Xperia10-DualSIM kernel: __apr_tal_write: glink_tx failed, rc[-11]
Oct 11 18:18:38 Xperia10-DualSIM kernel: apr_tal_write: Unable to send the packet, rc:-11
Oct 11 18:18:38 Xperia10-DualSIM kernel: apr_send_pkt: Write APR pkt failed with error -11
Oct 11 18:18:38 Xperia10-DualSIM kernel: afe_set_lpass_clk_cfg: AFE clk cfg failed with ret -11
Oct 11 18:18:38 Xperia10-DualSIM kernel: afe_set_lpass_clock_v2: afe_set_lpass_clk_cfg_v2 failed -22
Oct 11 18:18:38 Xperia10-DualSIM kernel: msm_sdw_codec 152c1000.msm-sdw-codec: __msm_sdw_reg_read:failed to enable the INT_MCLK1
Oct 11 18:18:38 Xperia10-DualSIM kernel: __msm_sdw_reg_read: 10 callbacks suppressed
I additionally recognized that the proximity sensor and the light sensor in CSD -Tool did not give any readings!
May this be connected to https://together.jolla.com/question/193485/any-workaround-for-malfunctioning-proximity-sensor-xa2/ or https://together.jolla.com/question/225772/xperia-10-plus-no-audiosound-with-new-log/ ?
What logs / outputs can I give you the next time the error occurs to give more usefull information?
Thank you a lot,
this solve my problem of muted encryption: https://together.jolla.com/question/226333/missing-sounds-in-xperia-x-rokua-330-encrypted/
Hi all,
Before i jump into the developer mode part (@jovirkku ) i will wait for next update.
Reading about the CSD-tool above i tried some testing as well and i figured out that
the Receiver playback test failed !
I’m wondering right now if that’s a hardware failure ?
Microphone up and down (for what it means ?) worked fine after a reboot.
Anyone familiar with this failure ?
Edit… that part seems to be solved now by inserting and extracting headphones as read in a german post
I’m also experiencing no sound during phonecalls (other sounds seem allright).
3.4.0.24 on XA2
EDIT: now after 5 restarts of the phone I have sound in phonecalls again.
I tried the systemd unit-file manipulation above but it doesn’t seem to help.
systemctl status pulseaudio reports it as inactive (dead). Not sure if that in itself is abnormal as I’ve not had a reason to check it on this phone before…